RY Series Hot Oil Horizontal Centrifugal Pump – RY Heat Conduction Pump

RY Heat Conduction Pump Product Details:

RY series heat pump this pump is reasonable in structure, good in performance and reliable in use.

Suitable for conveying high temperature liquid without solid particles.

Its corrosion resistance and operating temperature depend on the materials of the main parts in contact with the media (divided into three categories: 1.HT200; 2. The ZG230-450; 3. 1 cr18ni9ti OCr18Ni12 – Mo2Ti)

The scope of application of RY heat conduction pump:

Petroleum and chemical industry
Oil industry
Synthetic fiber industry
Textile printing and dyeing industry
Plastics and rubber industry
Paper industry
Timber industry
Construction industry

In addition, RY series heat pumps are also widely used in machinery industry, food industry, pharmaceutical production, oil supply circulation system of hot oil furnace and heat oil heating circulation system.

Performance range of RY heat conduction pump:

The flow rate is 1-500m cubed per hour;
Head 10-125m;
Temperature：＞350℃

RY series of heat conduction oil pump by CHINA HAINA PUMPS CO.,LTD of product design improvements repeatedly, through practical experiments have proved that my company a new generation of RY series of heat conduction oil pump in the normal use will be able to put an end to the medium leakage phenomenon!

Especially for the permeable media such as: similar to the medium of nine – carbon oil.

Structure introduction of RY heat conduction pump:

The RY type heat pump is a single-stage cantilever structure, which is divided into foot support and center support. The inlet of the pump is axial suction and the outlet is vertical upward.
Pump and drive motor are mounted on the same base by elastic coupling.
No cooling system is required for the whole unit.
RY series heat conduction pump is mainly composed of shell, rotor, bearing, seal and other parts. It adopts packing seal structure and adds heat resistant oil seal, which ACTS as auxiliary seal.
The pump and motor are connected by three – claw elastic coupling.
RY series of heat conduction oil pump on the pump from the design changed the traditional structure of hot oil pump, the cooling system of using natural cooling, reduce the volume of the pump, the structure is simple, save operating cost, safe and reliable.

Hot oil pumps flow,head and motor power data sheet:

Model	Flow m3/h	Head m	Speed r/min	Motor KW
15-15-100	3	10	2800	0.75
15-15-100A	2	10	2800	0.55
15-15-100B	1	10	2800	0.37
20-20-100	1	10	2800	0.37
20-20-125	1.5	22	2800	0.75
40-25-160	10	28	2900	2.2
25-25-160	3	27	2900	1.5
32-32-160	6	28	2900	1.5
50-32-160	12.5	30	2900	3.0
50-32-200	18	40	2900	5.5
50-32-200A	16	32	2900	4
50-32-250	12.5	80	2900	11
65-50-160	20	32	2900	5.5
65-40-200	30	48	2900	7.5
65-40-200A	25	35	2900	5.5
65-40-250	25	80	2900	15
65-40-250A	20	51	2900	7.5
65-40-315	25	125	2900	30
65-40-315A	22.5	100	2900	22
80-50-200	50	50	2900	15
80-50-200A	45	40	2900	11
80-50-200B	40	32	2900	7.5
80-50-250	50	80	2900	22
80-50-250A	43	60	2900	15
80-50-315	50	125	2900	45
80-50-315A	45	100	2900	30
100-65-200	100	50	2900	22
100-65-200A	94	44	2900	22
100-65-200B	87	38	2900	15
100-65-200C	80	32	2900	15
100-65-250	100	80	2900	37
100-65-250A	95	72	2900	37
100-65-250B	90	65	2900	30
100-65-250C	85	50	2900	30
100-65-315	100	125	2900	75
100-65-315A	95	113	2900	55
100-65-315B	90	100	2900	55
100-65-315C	82	84	2900	45
125-100-200	200	50	2900	45
125-100-200A	178	40	2900	37
125-100-250	200	70	2900	55
125-100-250A	190	63	2900	55
125-100-250B	180	57	2900	45
125-100-250C	170	51	2900	45
125-100-250D	150	70	2900	45
150-150-200	350	50	2900	75
150-150-200A	313	40	2900	55
200-150-400	350	50	1450	75
200-150-400A	330	45	1450	75
250-200-400	500	50	1480	110
250-200-500	500	80	1480	160
250-200-500A	400	50	1480	90